Pet Supplies > Salt Water Conditioners
Tech Calcium Buffer Part A 16oz
Ref #: [
Each of TechCB Part A and Part B is half of a ionically balanced, complete calcium and alkalinity control system for all marine aquariums. When used simultaneously in equal amounts the system will raise both the calcium and buffer level in the aquarium, and is phosphate, nitrate and gluconate free! Containing over 56,000 ppm of cationic calcium, predominately in the form of calcium carbonate, TechCB will produce an ionic residual with the composition of natural seawater! Each 16 oz. of TechCB will treat 1,900 gallons or 7,200 litres. We are finding improved results (i.e. faster growth rates) with this product, over Kalkwasser use alone, with many animals. We think that the constant addition of carbonate ions along with the calcium ions is working better than just adding buffer weekly, and dripping calcium daily.
Considerations for use: A pH of 8.0 to 8.3 and an alkalinity of 2.9 to 4.0 meq/L (8 to 11 dKH) is recommended. Calcium level should be maintained between 400 and 450 ppm. Test calcium & alkalinity and adjust the recommended dose for your particular system! Do not exceed 1/2 ml per gallon per 12 hour period. If you use Kalkwasser simultaneously with this product, use half the recommended dose of Kent TechCB. If you have trouble maintaining calcium or buffer level, check to see that the salt mix you are using has seawater level of magnesium. To save money and increase dissolvability, some manufacturers of popular newer salts have included only half the level of magnesium necessary in their sea salt mixes, resulting in low calcium solubility and poor buffering! If magnesium is low, use Kent TechM Magnesium.
Contents: Part A: deionized water containing the following ions: calcium, chloride, magnesium, strontium, bromide, lithium, rubidium, nickel, chromium, zinc, copper, cesium, iron, manganese, cobalt. Part B: deionized water containing the following ions: sodium, potassium, bicarbonate, carbonate, borate, fluoride, iodide, molybdate, selenate, vanadate, and tungstate.
If for any reason you are not satisfied with a product, please contact us before sending the item back. Since we deal with several sources, we will need to send you proper instructions on how and where to return the item(s).
We guarantee that all products you buy are free of defects or you may return it immediately for a new replacement. If your item was damaged during shipment, please contact us and we will send you proper instructions on how to file a claim.
If you are not satisfied with your item, you may return it to us within a period of 30 days. Shipping cost is non-refundable for undelivered, unclaimed, returned and refused packages, unless we made an error.
Additional Terms Which Applies For Jewellery Section
Hand made jewellery items cannot be returned or refunded from the time the fabrication begins.
Additional Terms Which Applies For Lingerie Items
Please note we can only ship to the 48 internal US states only, please do not ask as we can not ship anywhere else
For hygiene and health purposes, we do not accept any returns and/or exchanges on lingerie items. Please make sure that you have picked the correct size of the item before placing your order.
Additional Terms Which Applies For Fragrance Items
Please note, we do not accept returns for cosmetics and skincare items due to health reasons, please make your selections carefully.
Damage, DOA and missing parts:
If a product arrives damaged or DOA, you must contact us immediately. We will determine if the product needs to be replaced or if a replacement part needs to be sent out. If the product needs to be replaced, you will need
to obtain a return authorization number.